1979-1995 Toyota Pickup/4Runner Transfer Case Mounted Disc Parking Brake Kit

16 In Stock

1979-1995 Toyota Pickup/4Runner Transfer Case Mounted Disc Parking Brake Kit

With all of the axle upgrades and rear disk brake conversions that are popular on 4×4s, sometimes the parking brake mechanism is rendered inoperable or deleted. The All-Pro Transfer Case Mounted Disc Parking Brake solves this and other issues by placing the parking brake on the output shaft of the transfer case.

The kit hooks up directly to the stock parking brake cable. This kit provides dramatically increased braking over the stock parking brake with fewer parts to maintain and no cables hanging low to be snagged by rocks! This setup takes advantage of the gear ratio in the differential and increases the amount of braking force at the wheels.

The kit simply bolts onto the back of the transfer case with no driveshaft modifications needed. It fits 1984-1995 gear drive 4cyl transfer case equipped Pickups and 4Runners (V6 and automatic applications are not available) and can be used with drum or disc rear brakes. The caliper and rotor are available separately for those interested in building their own setup. Re-drilling rotor required for use on 1979-1983 trucks with original driveshafts due to smaller 8mm bolt hole size.

If the vehicle is equipped with an Electronic Speedometer pickup, you will need to purchase a Mechanical Speedometer pickup and Trail-Gear part number 301447-1-KIT to replace the Electronic Speedometer pickup.


  • Does not fit chain-drive transfer cases.
  • The rotor is drilled for the following driveline bolt patterns: 70mm x 61.5mm, 66mm x 66mm, 68.3mm x 60mm. All bolt holes are sized for 10mm bolts.

Fitment of the parking brake kit may be different for customers with dual cases, high clearance cross members, or non-stock body mounts.  Customers should check that they have at least 4.25" of radial clearance around their rear T-case output shaft to ensure rotor fitment.

⚠ WARNING-Cancer and Reproductive Harm - www.P65Warnings.ca.gov

  • ¼” Steel Mounting Bracket
  • Zinc-plated hardware
  • Mounting bracket, rotor, and arm Zinc-plated
  • Upgraded Wilwood Caliper to increase holding strength
  • Easy to replace brake pads 
  • One-piece mounting bracket for simplicity and strength 
  • The rotor is drilled for the following driveline bolt patterns: 70mm x 61.5mm, 66mm x 66mm, and 68.3mm x 60mm. All bolt holes are sized for 10mm bolts.

  • 1979 Toyota Pickup
  • 1980 Toyota Pickup
  • 1981 Toyota Pickup
  • 1982 Toyota Pickup
  • 1983 Toyota Pickup
  • 1984 Toyota Pickup
  • 1985 Toyota Pickup
  • 1986 Toyota Pickup
  • 1987 Toyota Pickup
  • 1988 Toyota Pickup
  • 1989 Toyota Pickup
  • 1990 Toyota Pickup
  • 1991 Toyota Pickup
  • 1992 Toyota Pickup
  • 1993 Toyota Pickup
  • 1994 Toyota Pickup
  • 1995 Toyota Pickup
  • 1984 Toyota 4Runner
  • 1985 Toyota 4Runner
  • 1986 Toyota 4Runner
  • 1987 Toyota 4Runner
  • 1988 Toyota 4Runner
  • 1989 Toyota 4Runner
  • 1990 Toyota 4Runner
  • 1991 Toyota 4Runner
  • 1992 Toyota 4Runner
  • 1993 Toyota 4Runner
  • 1994 Toyota 4Runner
  • 1995 Toyota 4Runner

Download Transfer Case Mounted Disc Parking Brake Kit installation instructions here.

Installation Instructions

Download Caliper Reorientation instructions here.

Installation Instructions

All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.

Please read and review our return and warranty requirement document before sending in products.

Warranty Exclusions

Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.

Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.

Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.

All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.

    To begin your warranty claim:
  • Please contact Trail-Gear Inc. at 559-252-4950 or email sales@trail-gear.com prior to returning any product under warranty to verify that warranty is still in effect.
  • Products must be shipped back to Trail-Gear Inc. at the expense of the customer.
    Ship all products to:
    5356 E. Pine Avenue
    Fresno, CA 93727.
  • Please place a clearly marked copy of the original invoice inside the package.
  • Please include a short note stating the problem you are experiencing.

If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.

If you are an international customer, please email the warranty department at sales@trail-gear.com to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account