Extended Harnesses for ARB Compressors
You like simple and so do we! Mount your on-board air compressor anywhere you want with the All-Pro Off-Road Extended Harnesses for ARB Compressors.
The short wiring harnesses that come with ARB compressors make them difficult to mount in the bed of your truck. Having your compressor right in the bed makes it easier to access for tire inflation while still allowing it to be used for locker activation. At roughly 18' long, making this the longest on the market, All-Pro's Extended ARB Harnesses are perfect for not only 2005-Current Toyota Tacomas, but almost any other vehicle as well due to its universality.
Unlike the competitors, each harness comes standard with wiring for both compressor and locker solenoids. Another bonus is that the compressor harnesses include an integrated switch circuit that allows you to mount a rocker switch in the bed, the cab, or both to control the compressor. Both switches are independent of one another so the compressor can be turned on even if the other switch is in the “OFF” position. Switches are not included.
The harness is supplied with connectors already installed requiring no special tools to connect the harness to the compressor. Wiring is appropriately sized for voltage and amperage requirements for the corresponding compressor model. Only correct automotive grade wiring is used throughout.
Available for both single and twin ARB on-board air compressors.
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- Harness length is approximately 18'.
- Split plastic wire loom ensures safe and easy routing.
- Connectors are the same as ARB's own compressor harnesses.
- Harnesses come standard with compressor and locker solenoid wiring.
- Wires are sized appropriately for voltage and amperage requirements of the different compressors.
- Automotive grade wires.
These kits were designed for use on 2005-Current Tacoma. However, they can be used universally on most vehicles.
- AP-308461 CKMTA12 and CKMTA24 Compressor
- AP-308463 CKMSA12 Compressor
- AP-308464 CKMA12 and CKMA24 Compressor
Download installation instructions here.Installation Instructions
All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.
Please read and review our return and warranty requirement document before sending in products.
Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.
Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.
Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.
All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.
- Please contact Trail-Gear Inc. at 559-252-4950 or email email@example.com prior to returning any product under warranty to verify that warranty is still in effect.
- Products must be shipped back to Trail-Gear Inc. at the expense of the customer.
- ATTN: WARRANTY
- 5356 E. Pine Avenue
- Fresno, CA 93727.
Ship all products to:
- Please place a clearly marked copy of the original invoice inside the package.
- Please include a short note stating the problem you are experiencing.
If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.
If you are an international customer, please email the warranty department at firstname.lastname@example.org to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.