COVID-19, supply shortages, & a surge in demand are causing longer-than-normal ship times. Rest assured that your order is our top priority. READ MORE…
PLEASE NOTE: Commercial carriers such as UPS, FedEx, and other carriers have suspended Delivery Service Guarantees until further notice. As a result, we are currently unable to refund shipping costs in the event your order delivery is delayed.

2005+ Toyota Tacoma Long Travel Kit

$3,102.70
SKU
AP-306716

Introducing the new All Pro High Clearance Long Travel Suspension! Engineered to get 12” of wheel travel while extending the track width by 2” per side, this new Long Travel Kit has been completely redesigned to give you an additional 2 inches of ground clearance. Our long travel features 4130 Chromoly tubular lower arms & upper control arms . The Lower Control Arms (LCAs) have been boxed and plated for added strength, durability and skid protection on the trail. Our LCA’s feature a 1” uniball that replaces the factory lower ball joint. The 2” wider Upper Control Arms (UCAs) feature an industry leading 1.25” uniball for maximum articulation & travel. We use heat-treated 17-4 stainless steel misalignment spacers to adapt the uniball to the factory spindle. The LCAs & UCAs pivot on polyurethane bushings and have zerk fittings for easy lubrication.

From rocks to sand and everything in between, this long travel kit does it all without sacrificing comfort, quality, and performance. Tested on some of the hardest trails around, including the Hammers, Rubicon, and Moab, the All-Pro LT kit is built tough!

Chromoly Axle Shafts (not included)

Our extended heat treated 4340 chromoly axle shafts, made by Currie Enterprises, are required for 4×4 applications. They are inserted into the factory inner and outer CVs to retain 4WD. These are not included in the kit and must be purchased separately. Please specify vehicle when ordering.

Timbren Bumpstops (not included)

All-Pro has teamed up with Timbren SES to offer an upgraded bumpstop for use with our LT kit, or even stock. They are made of a softer compound than their usual offerings for weight carrying, and they provide a smoother, stop than the factory bumpstop without needlessly limiting travel. Recommended for 33”+ tires. These are not included in the kit and must be purchased separately.

Long Travel Shocks (not included)

Long Travel Shocks are required for our Long Travel Kit.  For best results, we recommend Fox 2.5 Factory Series Remote Reservoir Long Travel Coilover Shocks or the Fox 2.5 Factory Series Remote Reservoir Long Travel Coilover Shocks with DSC Adjustment.

Tire & Wheel Recommendations

Max tire size without fiberglass fenders: 315/75/16 or 315/70/R17 (35″)
With Fiberglass (37″)
Max wheel backspacing: 4.75”
Alignment specs: Toe = factory; Camber = factory; Caster = 2.5-3 degrees

Tech Info

Material: Mostly 4130 Chromoly Steel Arms
Hardware: Grade 8 hardware included as needed, uses factory bolts & pivots
Weight: 95lbs (Upper & Lower Arms, Axles, Steering, Gussets)
Part# 3522-AP-HCLT-KT 

Max Wheel Backspace – 4.75″

Kit Details:

  • 2″ extended tubular 4130 Chromoly upper A-arms with a 1.25″ Teflon-lined uniball for maximum travel & strength and zerk fittings for easy bushing lubrication.
  • 2″ extended tubular 4130 Chromoly lower A-Arms with Billet CNC uniball adapter connector and bumpstop contact point – this strong design provides the utmost in off-road function and durability.
  • Extended stainless steel braided brake lines, DOT approved.
  • Heavy-duty spindle gussets (requires welding)
  • Limit Strap Kit (requires welding)
  • Tie Rod Extenders
  • CV Inner & Outer Boot Kit (Inner Boots not shown)
  • Includes eyelet spacers to allow use of Fox Shocks with Lower A-Arm (spacers not shown).
  • Made in USA
  • Fits 05+ Tacoma, FJ Cruiser, 03+ 4Runner, 2wd Tacoma Pre-Runner
  • 1″ – 4.5″ Lift Height
  • Long Travel shocks and extended IFS axle shafts required to complete installation.  Front Timbren Bump Stops recommended (not included).  See description below for details.

  • 2005-2015 Toyota Tacoma
  • 2003-2009 Toyota 4Runner
  • 2007-2009 Toyota FJ Cruiser

All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.

Please read and review our return and warranty requirement document before sending in products.

Warranty Exclusions


Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.

Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.

Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.

All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.

    To begin your warranty claim:
  • Please contact Trail-Gear Inc. at 559-252-4950 or email [email protected] prior to returning any product under warranty to verify that warranty is still in effect.
  • Products must be shipped back to Trail-Gear Inc. at the expense of the customer.
    Ship all products to:
    ATTN: WARRANTY
    5356 E. Pine Avenue
    Fresno, CA 93727.
  • Please place a clearly marked copy of the original invoice inside the package.
  • Please include a short note stating the problem you are experiencing.

If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.

If you are an international customer, please email the warranty department at [email protected] to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.