High Steer Kit for Toyota FJ60 Land Cruiser
High Steer Kit for Toyota FJ60 Land Cruiser
Crossover Steering is critical for rock crawling. The stock steering gets hung up on obstacles and just can't keep pace with today's super-flexible suspension systems. This results in broken stock steering arms and loss of steering.
Our heavy-duty High Steer Kit is now available for the FJ60 Land Cruiser.
Our FJ60 high steer kit features unbeatable quality at a great price. Choose super beefy forged steering arms in 4-stud or 6-stud configuration for left- or right-hand drive. The tie rod and drag links are made from 1/4” wall DOM tubing and powder-coated black for corrosion resistance. Along with FJ80 tie rod ends and your choice of flat or drop forged Pitman arms, this kit is easy to install and looks great on your FJ60.
AVAILABLE OPTIONS:
TGI-312483 - High Steer Kit for Toyota FJ60 Land Cruiser - Left-Hand Drive | 4-Stud | Flat Pitman Arm
TGI-312484 - High Steer Kit for Toyota FJ60 Land Cruiser - Right-Hand Drive | 4-Stud | Flat Pitman Arm
TGI-312485 - High Steer Kit for Toyota FJ60 Land Cruiser - Left-Hand Drive | 6-Stud | Flat Pitman Arm
TGI-312486 - High Steer Kit for Toyota FJ60 Land Cruiser - Right-Hand Drive | 6-Stud | Flat Pitman Arm
TGI-312487 - High Steer Kit for Toyota FJ60 Land Cruiser - Left-Hand Drive | 4-Stud | Drop Pitman Arm
TGI-312488 - High Steer Kit for Toyota FJ60 Land Cruiser - Right-Hand Drive | 4-Stud | Drop Pitman Arm
TGI-312489 - High Steer Kit for Toyota FJ60 Land Cruiser - Left-Hand Drive | 6-Stud | Drop Pitman Arm
TGI-312490 - High Steer Kit for Toyota FJ60 Land Cruiser - Right-Hand Drive | 6-Stud | Drop Pitman Arm
IMPORTANT NOTES:
- Flat steering arm requires custom mounting hardware (hardware not included).
- Available in Left or Right-Hand Drive. This nomenclature refers to the steering wheel's position as seen from inside the vehicle.
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- Choice of 4-stud or 6-stud steering arms forged from SAE 8620 tool steel
- Choice of flat or drop heavy-duty pitman arm
- (2) LH & (2) RH FJ80 Tie Rod Ends with jam nuts
- Heavy-duty 1/4” wall DOM tie rod & drag link with black powder-coat finish
| TOYOTA FJ60 LAND CRUISER (1980-1990) 1980 Toyota FJ60 Land Cruiser 1981 Toyota FJ60 Land Cruiser 1982 Toyota FJ60 Land Cruiser 1983 Toyota FJ60 Land Cruiser 1984 Toyota FJ60 Land Cruiser 1985 Toyota FJ60 Land Cruiser 1986 Toyota FJ60 Land Cruiser 1987 Toyota FJ60 Land Cruiser 1988 Toyota FJ60 Land Cruiser 1989 Toyota FJ60 Land Cruiser 1990 Toyota FJ60 Land Cruiser |
All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.
Please read and review our return and warranty requirement document before sending in products.
Warranty Exclusions
Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.
Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.
Additionally excluded from this warranty are parts that are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.
All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.
Axle/Birfield/CV Joint Warranty Disclaimer
Axle and Birfield/CV joints are warranted by the Trail-Gear Family of Companies for mechanical failures (e.g. breakage) only to the original purchaser. Proof of purchase is required for all warranty claims. Trail-Gear Family of Companies reserves the right to deny any claim if the product is shown to be incorrectly installed or the subject of collateral damage of surrounding components. Trail-Gear Family of Companies is not responsible for any collateral damages to any components caused by or related to a Trail-Gear Family of Companies product. Trail-Gear Family of Companies is not responsible for any shop/labor hours related to the installation or replacement of Trail-Gear Family of Companies product.
All warranty claims are subject to review and acceptance at the sole discretion of the Trail-Gear Family of Companies and may require the return of parts at the customer's expense for warranty review. Parts that are rejected for warranty coverage will be shipped back to the customer at the customer’s expense or scrapped after 10 business days.
For Axle and Birfield/CV joints with Lifetime Warranty, Lifetime Warranty means one-time replacement within the lifetime of originally purchased product only to the original purchaser.
The warranty does not cover the following conditions:
- Normal wear and tear
- Noise
- Twisted shafts
- Twisted splines
- Bent axles
- Stripped threads
- Modification of the product
- Intentional or willful destruction of the product
- Failures from improper installation or storage
- Failures from other than the intended use
- Please contact Trail-Gear Inc. at 559-252-4950 or email [email protected] prior to returning any product under warranty to verify that warranty is still in effect.
- Products must be shipped back to Trail-Gear Inc. at the expense of the customer. Ship all products to:
- ATTN: WARRANTY
- 5356 E. Pine Avenue
- Fresno, CA 93727.
- Please place a clearly marked copy of the original invoice inside the package.
- Please include a short note stating the problem you are experiencing.
If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.
If you are an international customer, please email the warranty department at [email protected] to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.