1996-2004 Tacoma All-Pro Off-Road Coil Bucket Gussets
1996-2004 Tacoma / 1996-2002 4Runner All-Pro Off-Road Coil Bucket Gussets
The suspension system on your Toyota is robust. In stock form these trucks are pretty hard to beat. But you're not leaving your truck in stock form, are you? Increased stresses from larger tires, lift struts, and real world off-roading can highlight any weak points in a truck's suspension. Two such weak points are the single-shear control arm mounts and thin coil tower buckets. Thankfully, these two problem areas are easily addressed with this one gusset kit.
All-Pro Off-Road's Coil Bucket Gussets weld directly to the frame and the front shock tower. This prevents the coil bucket from flexing which can lead to crack development or bending. These also create a double-shear mounting point for control arms.
Gussets are compatible with OEM and aftermarket control arms.
NOTE: Welding locations will be different between control arm manufacturers. Thus, if you plan to install aftermarket control arms it is best to do so before installing guessets.
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- 3/16” thick ASTM A36 Steel
- Clearance holes for brake lines and ABS wires
- Compatible with OEM and aftermarket upper control arms
- Welding required for installation
- Product ships raw/unpainted
- 1996 Toyota Tacoma
- 1997 Toyota Tacoma
- 1998 Toyota Tacoma
- 1999 Toyota Tacoma
- 2000 Toyota Tacoma
- 2001 Toyota Tacoma
- 2002 Toyota Tacoma
- 2003 Toyota Tacoma
- 2004 Toyota Tacoma
- 1996 Toyota 4Runner
- 1997 Toyota 4Runner
- 1998 Toyota 4Runner
- 1999 Toyota 4Runner
- 2000 Toyota 4Runner
- 2001 Toyota 4Runner
- 2002 Toyota 4Runner
Download installation instructions here.Installation Instructions
All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.
Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.
Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.
Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.
All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.
- Please contact Trail-Gear Inc. at 559-252-4950 or email firstname.lastname@example.org prior to returning any product under warranty to verify that warranty is still in effect.
- Products must be shipped back to Trail-Gear Inc. at the expense of the customer.
- ATTN: WARRANTY
- 5356 E. Pine Avenue
- Fresno, CA 93727.
Ship all products to:
- Please place a clearly marked copy of the original invoice inside the package.
- Please include a short note stating the problem you are experiencing.
If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.
If you are an international customer, please email the warranty department at email@example.com to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.