Toyota Tacoma Bed Compressor Box Mounts
All-Pro Off-Road's Toyota Tacoma Bed Compressor Box Mount is an innovative upgrade allowing you to easily mount an ARB compressor in your truck's inner bedside. This easy to install aluminum box takes the place of the factory driver side inner bed storage box. Choose between maintaining factory appearance by using the original bed box bezel or upgrading to All-Pro’s steel door and bezel with cam latches or locking latches. Bolt-on design requires no cutting unless using factory bezel.
Boxes are made from 1/8" thick 5052 aluminum and doors are made from 11-gauge steel. Boxes and doors are both black powder coated. These boxes can even be used without a compressor installed to achieve a stronger and more secure storage upgrade to the factory box.
A variety of ARB compressors are available to fit your needs.
- CKSA12: Compact and quiet compressors specifically designed for Air Locker activation.
- CKMA12: High Output compressor for Air Locker activation, fast tire inflation, and a range of other on-board air needs.
- CKMTA12/24: Maximum Output twin motor compressor for Air Locker activation, fast tire inflation, and suitable for many air tools when used with an air tank. Available in 12V or 24V configurations.
You will also receive the appropriate Extended Harness for ARB Compressors when you order an ARB Air Compressor with your Compressor Bed Box Mount. The short wiring harnesses that come with ARB compressors make them difficult to mount in the bed of your truck. At roughly 18' long, making this the longest on the market, All-Pro's Extended ARB Harnesses make installation simple.
Each harness comes standard with wiring for both compressor and locker solenoids. Another bonus is that the compressor harnesses include an integrated switch circuit that allows you to mount a rocker switch in the bed, the cab, or both to control the compressor. Both switches are independent of one another so the compressor can be turned on even if the other switch is in the “OFF” position. Switches are not included.
The harness is supplied with connectors already installed requiring no special tools to connect the harness to the compressor. Wiring is appropriately sized for voltage and amperage requirements for the corresponding compressor model. Only correct automotive grade wiring is used throughout.
Note: The switch shown in the photographs is supplied only with the ARB compressor options.
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- 1/8" Thick 5052 Aluminum Box
- 11-Gauge Steel Door and Bezel Pieces
- Black Powder Coating
- Cam locks with Optional Master Keyed Locks
- Available with Extended ARB Compressor Harnesses and ARB compressors
- Compatible with Upgraded Steel Door or Factory Plastic Door
2005 Toyota Tacoma
2006 Toyota Tacoma
2007 Toyota Tacoma
2008 Toyota Tacoma
2009 Toyota Tacoma
2010 Toyota Tacoma
2011 Toyota Tacoma
2012 Toyota Tacoma
2013 Toyota Tacoma
2014 Toyota Tacoma
2015 Toyota Tacoma
2016 Toyota Tacoma
2017 Toyota Tacoma
2018 Toyota Tacoma
Download Bed Compressor Mount Installation Instructions here.Installation Instructions
All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.
Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.
Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.
Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.
All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.
- Please contact Trail-Gear Inc. at 559-252-4950 or email email@example.com prior to returning any product under warranty to verify that warranty is still in effect.
- Products must be shipped back to Trail-Gear Inc. at the expense of the customer.
- ATTN: WARRANTY
- 5356 E. Pine Avenue
- Fresno, CA 93727.
Ship all products to:
- Please place a clearly marked copy of the original invoice inside the package.
- Please include a short note stating the problem you are experiencing.
If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.
If you are an international customer, please email the warranty department at firstname.lastname@example.org to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.