Trail-Creeper Super Finish 8.4-in Ring and Pinion Gears

Rating:
% of 100
As low as $504.85
9 In Stock
Only %1 left
SKU
Trail-Creeper Super Finish 8.4-in Ring and Pinion Gears

Trail-Creeper Super Finish 8.4 Inch Ring and Pinion Gears

Tired of waiting for your ring and pinions to break in before towing or hitting the trail? Trail-Gear has the solution with our new Trail-Creeper Super Finish 8.4” Ring & Pinion Gears. Our Trail-Creeper Super Finish 8.4” Ring & Pinion Gears require absolutely no break-in time. You can install these gears and get right into the action without the need to worry about premature ring and pinion failure.

Trail-Creeper Super Finish 8.4” Ring & Pinion Gears are made from tool-grade 8620 steel and heat-treated for maximum strength and wear resistance. The gear teeth are cut using Gleason CNC hobbing machines & cutters. Gleason gear-cutting technology produces an unprecedented level of accuracy and surface finish, which allows the gears to transmit more torque and improve fuel efficiency.

Key Benefits:

  • No break-in period.
  • Less friction.
  • Reduced wear allowing bearings and gears to last longer.

Trail-Creeper Super Finish Ring & Pinion Gears are treated with REM® Isotropic Super Finishing (ISF®) process. The process that is used to polish our gears is the same used for aerospace applications. The REM® Isotropic Super Finishing (ISF) process removes the microscopic peaks in the material and creates a surface on the ring and pinion gears with a roughness of less than 10 µin Ra! This means that there is less friction between the gears, reducing wear by 95% and allowing the gears and bearings to run cooler and last longer.

The REM® Isotropic Super Finishing (ISF) process not only decreases friction and wear in the gears, but it creates a non-directional surface that increases lubricant retention on the gear surface, reducing lubrication requirements.

On Toyota trucks, we recommend 4.88s for 33" tires and 5.29s for 35" and larger.

AVAILABLE OPTIONS:

TGI-311563 - Trail-Creeper Super Finish 8.4-in Ring and Pinion Gears - 4.88
TGI-311564 - Trail-Creeper Super Finish 8.4-in Ring and Pinion Gears - 5.29

COMPATIBLE LOCKERS

Part Number

Description

ARB

Eaton E-Locker

Detroit Locker

Spool

TGI-311563

Trail-Creeper Super Finish 4.88 Toyota 8.4" Ring & Pinion Gears

ARB-RD129

EAT-14216-1

EAT-187SL199A

YGA-32384

TGI-311564

Trail-Creeper Super Finish 5.29 Toyota 8.4" Ring & Pinion Gears

ARB-RD129

EAT-14216-1

EAT-187SL199A

YGA-32384

⚠ WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov

  • Made from tool-grade 8620 steel and heat-treated for maximum strength and wear resistance.
  • The gear teeth are cut using Gleason CNC hobbing machines & cutters. Gleason gear-cutting technology produces an unprecedented level of accuracy and surface finish, which allows the gears to transmit more torque and improve fuel efficiency.
  • Higher accuracy and surface finish also produces a quieter-running gear set.
  • No break-in period.
  • Less friction.
  • Reduced wear allowing bearings and gears to last longer.
  • Treated with REM® Isotropic Super Finishing (ISF) process.
  • The REM® Isotropic Super Finishing (ISF) process removes the microscopic peaks in the material and creates a surface on the ring and pinion gears with a roughness of less than 10 µin Ra! This means that there is less friction between the gears, reducing wear by 95% and allowing the gears and bearings to run cooler and last longer.
  • Non-directional surface that increases lubricant retention on the gear surface, reducing lubrication requirements.
  • For Toyota 8.4” rear axles only. Will not fit 8" solid axles.
  • Pinion Spline: 30-Spline
  • Ring Gear Bolts: 12 bolts (Ring Gear Bolts not included)
  • Ring Gear Diameter: 8.4”
  • Ring Gear Rotation: Standard

TOYOTA TACOMA - Non-Factory E-Locker Only
(1995-2015)

1995 Toyota Tacoma
1996 Toyota Tacoma
1997 Toyota Tacoma
1998 Toyota Tacoma
1999 Toyota Tacoma
2000 Toyota Tacoma
2001 Toyota Tacoma
2002 Toyota Tacoma
2003 Toyota Tacoma
2004 Toyota Tacoma
2005 Toyota Tacoma
2006 Toyota Tacoma
2007 Toyota Tacoma
2008 Toyota Tacoma
2009 Toyota Tacoma
2010 Toyota Tacoma
2011 Toyota Tacoma
2012 Toyota Tacoma
2013 Toyota Tacoma
2014 Toyota Tacoma
2015 Toyota Tacoma
TOYOTA TUNDRA
(1999-2006)


1999 Toyota Tundra
2000 Toyota Tundra
2001 Toyota Tundra
2002 Toyota Tundra
2003 Toyota Tundra
2004 Toyota Tundra
2005 Toyota Tundra
2006 Toyota Tundra
TOYOTA T100
(1993-1998)


1983 Toyota T100
1984 Toyota T100
1985 Toyota T100
1986 Toyota T100
1987 Toyota T100
1988 Toyota T100
TOYOTA SEQUOIA
(2001-2007)


2001 Toyota Sequoia
2002 Toyota Sequoia
2003 Toyota Sequoia
2004 Toyota Sequoia
2005 Toyota Sequoia
2006 Toyota Sequoia
2007 Toyota Sequoia

 

Download installation instructions here.

Installation Instructions

All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.

Please read and review our return and warranty requirement document before sending in products.

 

Warranty Exclusions


Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.

Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.

Additionally excluded from this warranty are parts that are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.

All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.

To begin your warranty claim:
  • Please contact Trail-Gear Inc. at 559-252-4950 or email sales@trail-gear.com prior to returning any product under warranty to verify that warranty is still in effect.
  • Products must be shipped back to Trail-Gear Inc. at the expense of the customer. Ship all products to:
    ATTN: WARRANTY
    5356 E. Pine Avenue
    Fresno, CA 93727.
  • Please place a clearly marked copy of the original invoice inside the package.
  • Please include a short note stating the problem you are experiencing.

If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.

If you are an international customer, please email the warranty department at sales@trail-gear.com to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Copyright © 2023 ALL-PRO OFF-ROAD. All rights reserved.